0 Product Products (empty) No products
Product successfully added to your shopping cart
Example of chair leg that is of a solid material, i.e. wood or steel.
The bottom of the chair leg
MEASURE THE DIAMETER OF THE LEG CLARIFICATION!
Take a measurement from the outer sides of the bottom, make sure the ruler is paced in center of the bottom circle. The furniture leg's diameter will be having the exact size as the outside pad's diameter.
Example of an outside furniture pad.
Example of chair leg that is like a tube, primarily steel legs of steel of iron.
The bottom of the chair leg
MEASURE THE DIAMETER INSIDE THE LEG CLARIFICATION!
The furniture leg's inside diameter will be having the exact size as the pad's diameter.
Example of an inside furniture pad.
Furniture leg
The bottom of the chair leg
MEASURE THE DIAMETER ON THE BOTTOM CLARIFICATION!
The pad to be fitted on-top doesn't neccessarily have to match the exact diameter, it's ok if the pad is matching or having a bit smaller size.
Example of an on-top furniture pad.
Ruler.
For easiest application, turn the furniture upside down. Wipe of any dirt, grease or dust from the leg pipe and press on the legs caps. If necessary use a rubber mallet to knock on the pad.
The gliding chair leg caps are good for chairs that are made to move around. They are made of strong plastics to provide all long life time.
Tip protecting chair caps with felt are avaibable in black colour. The caps protects hardwood floor, and do have a long life time.
These Tip protecting chair caps are available for chair legs with diameter 22 to 25 mm. The dimesions of these tip protecting chair caps are length 40 mm and Width 18 mm.
The chair leg cap w. small plug can be mounted on to the chair leg for a functional use, and works well as floor protection. It is available for legs with diameters as 12 to 13 or 15 to 16 mm.
